URL: https://multiphasesystems.online/mfs2022.1.007,en
DOI: https://doi.org/10.21662/mfs2022.1.007
Abstract
Robotics is an interdisciplinary scientific direction, therefore, when solving a number of problems, it becomes necessary to conduct research that is typical for other areas of science. So, when synthesizing new types of equipment in the „Robotics and Control in Technical Systems” laboratory, more accurate characteristics of individual components and assemblies were required, which ultimately led to a whole cycle of work on microfluidics. Of particular interest in the work performed is the development of new microdevices, since this involves the construction of a single complex of new mathematical and computer models that link hydrodynamics, elasticity theory, heat transfer process, parametric optimization and control theory. The first models were obtained that describe the movement of a piston fixed by an elastic spring in a pipe, taking into account the influence of dry viscous types of friction. By the method of factorial computational experiment, analytical dependencies were obtained for the main part of the fuel dosing unit — servo piston. Next, mathematical and computer models were built to analyze the fluid flow through a channel with variable geometry. Based on the simulation results, the design of a new micromechanical device — a piezoelectric micropump consisting of an elastic tube and annular piezoelements located on it, the sequential oscillation of which creates a non-zero average fluid flow, was refined. In the course of the adaptation of the model, an effective design of the device for smoothing fluid flow pulsations was obtained. These devices were developed and calculated for use in the liquid cooling system of capillary microgripper. A parametric analysis of the process of cooling the hot side of the Peltier element of the microgripper was carried out with a change in the following gripper parameters: the size and shape of the radiator, the coolant flow rate and the heat transfer coefficient. The results of the analysis of temperature fluctuations of the radiator under unsteady fluid flow confirmed the expected dependences of the cooling efficiency on the chosen geometry of the radiator and low-frequency fluid flow fluctuations.
Darintsev O.V. Synthesis of new microfluidics models in the research in the “Robotics and Control in Technical Systems” laboratory. Multiphase Systems. 17 (2022) 1–2. 74–96 (in Russian).
microfluidics,
microrobotics,
hydraulic resistance,
dynamically variable channel geometry,
piezoelectric micropump,
capillary microgripper,
fluid cooling system
Article outline
Robotics is an interdisciplinary scientific direction, therefore, when solving a number of problems, it becomes necessary to conduct research that is typical for other areas of science. So, when synthesizing new types of equipment in the “Robotics and Control in Technical Systems” laboratory, more accurate characteristics of individual components and assemblies were required, which ultimately led to a whole cycle of work on microfluidics.
Of particular interest in the work performed is the development of new microdevices, since this involves the construction of a single complex of new mathematical and computer models that link hydrodynamics, elasticity theory, heat transfer process, parametric optimization and control theory.
The first models were obtained that describe the movement of a piston fixed by an elastic spring in a pipe, taking into account the influence of dry and viscous types of friction. The combined effect of the spring stiffness and dry friction leads to the fact that the equilibrium point is determined by the presence of the spring stiffness, and the oscillation period is determined by the presence of the dry friction force (oscillations occur at the frequency of the pressure drop, and not at the natural frequency). With an increase in both the spring stiffness and the dry friction force, the amplitude of the piston oscillations decreases. For small friction forces (both dry and viscous), the transition to a periodic mode of motion occurs in a large number of cycles. In a system with a spring, the effect of viscous friction is significant. At large pressure drops, the curvature of the pipe can be neglected and the problem can be reduced to an unsteady parallel flow in a flat capillary. Mathematical and computer models of the servopiston are constructed. The factors of the computational experiment and the response functions are chosen. An approximation of the response functions in the form of a polynomial with linear, pair and quadratic contributions of the factors is proposed. The essential factors of the piston dynamics and their interaction and the approximation error are determined. The temperature dependences of the parameters have been established, which makes it possible to carry out an adequate simulation of the operation of the element, taking into account dynamic changes in this element during operation. A method for combining individual elements of a computing stand into a system is shown. A method for increasing the strength of the piston surface to cavitation effects is presented. Calculations have shown that with special treatment, the piston surface will become more resistant to erosion damage; deformations are localized near the area to which the force is applied, at a distance of about two bubble diameters; cavitation destruction of the material is related to the yield threshold and grain size, does not depend on the Young's modulus and is inversely proportional to the Poisson's ratio; the simultaneous collapse of two bubbles at a distance of the order of one or two bubble sizes increases the maximum pressure on the surface and, consequently, increases the probability of irreversible deformation of the surface.
Next, mathematical and computer models were built to analyze the fluid flow through a channel with variable geometry. Simulation of dynamic geometry change opens up great opportunities in the development of new technical devices. For example, the longitudinal movement of the hydraulic resistance can be used to create a flow in a channel with a constant pressure, and the transverse compression can be used to control the fluid flow in a channel with a non-zero pressure drop. Based on the simulation results, the design of a new micromechanical device was refined - a piezoelectric micropump consisting of an elastic tube and annular piezoelements located on it, the sequential oscillation of which creates a non-zero average fluid flow. In the course of the adaptation of the model, an effective design of the device for smoothing fluid flow pulsations was obtained.
These devices were developed and calculated for use in the fluid cooling system of capillary microgripper. A parametric analysis of the process of cooling the hot side of the Peltier element of the microgripper was carried out with a change in the following gripper parameters: the size and shape of the radiator, the coolant flow rate and the heat transfer coefficient.
The results of the analysis of temperature fluctuations of the heatsink under unsteady fluid flow confirmed the expected dependences of the cooling efficiency on the chosen geometry of the heatsink and low-frequency fluid flow fluctuations. An analysis was made of switching the cooling system from one operating mode to another. It was found that the time for establishing the operating mode coincides with the duration of switching to another mode of operation and does not depend on the thermal power of the Peltier element, which made it possible to propose a mechanism for “fast” mode switching. Based on the results of a numerical calculation, one-parameter analytical approximations were constructed for the dependence of the heat sink temperature on time, as well as the duration of the “fast” switching.
References
- Convery N., Gadegaard N. 30 years of microfluidics. Micro and Nano Engineering. 2019. V. 2. Pp. 76–91.
DOI: 10.1016/j.mne.2019.01.003 - Berg J.M., Dallas T. Peristaltic Pumps. Encyclopedia of Microfluidics and Nanofluidics (eds. by Li D.). New York: Springer, 2015. Pp. 2693–2701.
DOI: 10.1007/978-0-387-48998-8_1198 - Microfluidics Based Microsystems: Fundamentals and Applications. Eds. by Kakaç S., Kosoy B., Li D., Pramuanjaroenkij A. Dordrecht: NATO Science for Peace and Security Series A: Chemistry and Biology. Springer. 2010. 618 p.
DOI: 10.1007/978-90-481-9029-4 - Patankar S.V. Numerical heat transfer and fluid flow. Taylor and Francis, 1980.
- Cotta R.M., Knupp D.C., Naveira-Cotta C.P. Analytical Heat and Fluid Flow in Microchannels and Microsystems. Cham: Springer. 2016. 164 p.
DOI: 10.1007/978-3-319-23312-3 - Darintsev O.V., Migranov A.B. [Capillary micro-grip with feedback] Capilarnyi microzahvat s obratnoi svazju. Patent RF No. 2261795 RU, [Published] Opublikovano 10.10.2005. Byul. N. 28 (in Russian).
https://www1.fips.ru/registers-doc-view/fips_servlet?DB=RUPAT&DocNumber=2261795&TypeFile=html - Darintsev O. Microgrippers: Principle of Operation, Construction, and Control Method. Smart Innovation, Systems and Technologies. 2021. V. 187. Pp. 25–37. Springer, Singapore.
DOI: 10.1007/978-981-15-5580-0_2 - Nasibullayev I.Sh., Darintsev O.V. [Computer 2D modelling of a micro-grip fluid cooling system]. Vychislitel’nyye tekhnologii [Computational technologies]. 2021. V. 26. No. 2. Pp. 4–20 (in Russian).
DOI: 10.25743/ICT.2021.26.2.002 - Raval S., Patel B. A Review on Grasping Principle and Robotic Grippers. International Journal of Engineering Development and Research. 2016. Vol. 4. Pp. 483–490.
- DiSalvo F.J. Thermoelectric Cooling and Power Generation. 1999. Science. Vol. 285, no. 5428. Pp. 703–706.
DOI: 10.1126/science.285.5428.703 - M.J. Deasy, N. Baudin, S.M. O’Shaughnessy, A.J. Robinson. Simulation-driven design of a passive liquid cooling system for a thermoelectric generator. Applied Energy. V. 205, 2017, pp. 499-510,
DOI: 10.1016/j.apenergy.2017.07.127 - Afshari F. Experimental and numerical investigation on thermoelectric coolers for comparing air-to-water to air-to-air refrigerators. Journal of Thermal Analysis and Calorimetry. 2020.
DOI: 10.1007/s10973-020-09500-6 - Jami F. Tullius, Robert Vajtai, Yildiz Bayazitoglu. A Review of Cooling in Microchannels. Heat Transfer Engineering. 2011. V. 32, No 7–8. P. 527–541.
DOI: 10.1080/01457632.2010.506390 - Chien-Yuh Yang , Chun-Ta Yeh , Wei-Chi Liu, Bing-Chwen Yang. Advanced Micro-Heat Exchangers for High Heat Flux. Heat Transfer Engineering. 2007. V. 28, No 8–9. Pp. 788-794,
DOI: 10.1080/01457630701328676 - C. Nonino, S. Del Giudice, S. Savino. Temperature-Dependent Viscosity and Viscous Dissipation Effects in Microchannel Flows With Uniform Wall Heat Flux, Heat Transfer Engineering. 2010. V. 31, No 8. Pp. 682–691.
DOI: 10.1080/01457630903466670 - Nasibullayev I.Sh., Nasibullaeva E.Sh. [The effect of temperature on the dynamics of fluid flow in technical systems with jets]. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2016. V. 11, No. 1. P. 1–9 (In Russian).
DOI: 10.21662/uim2016.1.001 - Laser D.J., Santiago J.G. A review of micropumps. Journal of Micromechanics and Microengineering. 2004. V. 14. Pp. R35–R64.
DOI: 10.1088/0960-1317/14/6/R01 - Fluid-structure Interaction: Modelling, Simulation, Optimization. Eds. by Bungartz H.J., Schäfer M. Heidelberg: Springer. 2006. 401 p.
DOI: 10.1007/3-540-34596-5 - Nasibullayev I.Sh. [The development of a computer model for the main element of the fuel metering unit] Razrabotka kompyuternoy modeli osnovnogo elementa agregata dozirovaniya topliva. Vychislitelnye tehnologii [Computational Technologies]. 2016. V. 21, No. 2. Pp. 26–41. (In Russian).
eLIBRARY ID: 28886942 - Bruus H. Theoretical microfluidics. Lecture notes third edition. MIC Department of Micro and Nanotechnology Technical University of Denmark. 2006. 237 p.
- Chiang Ch.-Yu, Pironneau O., Sheu T., Thiriet M. Numerical Study of a 3D Eulerian Monolithic Formulation for Incompressible Fluid-Structures Systems. Fluids. 2017. V. 2, No. 2. P. 34–53.
DOI: 10.3390/fluids2020034 - Hecht F. New development in FreeFem++ // Journal of Numerical Mathematics. 2012. V. 20, No. 3–4. Pp. 251–265.
DOI: 10.1515/jnum-2012-0013 - Nasibullayev I.Sh., Darintsev O.V., [Two-dimensional dynamic model of the interaction of a fluid and a piezoelectric bending actuator in a plane channel] Dvumernaya dinamicheskaya model’ vzaimodeystviya zhidkosti i p’yezoelektricheskogo privoda s poperechnym izgibom v ploskom kanale. Multiphase Systems [Mnogofaznyye sistemy]. 2019. V. 14, No. 4. Pp. 220–232 (In Russian).
DOI: 10.21662/mfs2019.4.029 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Darintsev O.V., [Simulation of fluid flow through a elastic microchannel deformed by a piezoelement in microgrip cooling systems] Modelirovaniye techeniya zhidkosti cherez deformiruyemyy p’yezoelementom elastichnyy mikrokanal sistemy okhlazhdeniye mikrozakhvata. Mechatronics, automation, control [Mekhatronika, Avtomatizatsiya, Upravlenie]. 2019. V. 20, No. 12. Pp. 740–750 (In Russian).
DOI: 10.17587/mau.20.740-750 - Nasibullayev I.Sh., Darintsev O.V., Nasibullaeva E.Sh. and Bogdanov D.R. Piezoelectric Micropumps for Microrobotics: Operating Modes Simulating and Analysis of the Main Parameters of the Fluid Flow Generation. Smart Innovation, Systems and Technologies. 2021. V. 187. Pp. 525–536. Springer, Singapore.
DOI: 10.1007/978-981-15-5580-0_43 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Denisova E.V. [Dynamics of fluid flow in technical systems with jets] Dinamika techeniya zhidkosti v tekhnicheskikh sistemakh s zhiklerami. Bulletin of the Ufa Scientific Center of the Russian Academy of Sciences [Izvestiya Ufimskogo Nauchnogo Centra RAN]. 2015. No. 4. Pp. 20–25 (In Russian).
eLIBRARY ID: 25732231 - Nasibullayev I.Sh., Nasibullaeva E.Sh. [The fluid flow through a system of connected elements of a technical device such as pipe-hydraulic resistance–pipe] Techeniye zhidkosti cherez sistemu svyazannykh elementov tekhnicheskogo ustroystva tipa truba–gidrosoprotivleniye–truba. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2016. V. 11, No. 2. Pp. 141–149 (In Russian).
DOI: 10.21662/uim2016.2.021 - Nasibullayev I.Sh., Nasibullaeva E.Sh. [Fluid flow through hydraulic resistance with dynamically changing geometry] Techeniye zhidkosti cherez gidrosoprotivleniye s dinamicheski izmenyayemoy geometriyey. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2017. V. 12, No. 1. Pp. 59–66 (In Russian).
DOI: 10.21662/uim2017.1.009 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Darintsev O.V. Computer Axisymmetric Model of a Piezoelectric Micropump. Journal of Engineering Science and Technology Review. 2021. V. 14, No. 2. Pp. 152–164.
DOI: 10.25103/jestr.142.19 - Nasibullayev I.Sh., Nasibullaeva E.Sh. [Axisymmetric flow near the critical point on the moving boundary] Osesimmetrichnoye techeniye vblizi kriticheskoy tochki na podvizhnoy granitse. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2010. V. 7, No 1. Pp. 82–190 (In Russian).
DOI: 10.21662/uim2010.1.016 - Bakhvalov N.S., Zhidkov N.P., Kobelkov G.G. [Numerical methods. 8th ed. Moscow: Basic Knowledge Laboratory] Chislennyye metody. 8-ye izd. M.: Laboratoriya Bazovykh Znaniy. 2000. (In Russian)
- Sivukhin D.V. [General course of physics. V. I. Mechanics. M.: Science] Obshchiy kurs fiziki. M.: Nauka. 1979. T. I. Mekhanika. 1979. 520 p. (In Russian)
- Sedov L. I. [Continuum mechanics. V. 1. M.: Nauka] Mekhanika sploshnoy sredy. T. 1. M.: Nauka. 1970. 492 p. (In Russian)
- Nasibullayev I.Sh., Nasibullaeva E.Sh. [Influence of various types of frictional force on the movement of the piston in the pipe] Vliyaniye razlichnykh vidov sily treniya na dvizheniye porshnya v trube. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2011. V. 8, No 1. Pp. 257–265 (In Russian).
DOI: 10.21662/uim2011.1.025 - Nasibullayev I.Sh., Nasibullaeva E.Sh. [The movement of the piston in a cylindrical tube with viscous friction] Dvizheniye porshnya v tsilindricheskoy trube s uchetom vyazkogo treniya. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2012. V. 9, No 2. Pp. 107–112 (In Russian).
DOI: 10.21662/uim2012.2.059 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Denisova E.V. [Influence of different types of friction force in the system of two coaxial cylinders] Vliyaniye razlichnykh vidov sily treniya v sisteme dvukh koaksial’nykh tsilindrov. Mekhatronika, avtomatizatsiya, upravleniye. 2014. No 10. Pp. 54–59 (In Russian).
eLIBRARY ID: 22307858 - Nasibullaeva E.Sh., Denisova E.V., Nasibullayev I.Sh. [Full-size mathematical model of the fuel metering unit] Rasshirennaya matematicheskaya model’ funktsionirovaniya agregata dozirovaniya topliva. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2011. V. 8, No 1. Pp. 249–256 (In Russian).
DOI: 10.21662/uim2011.1.024 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Denisova E.V. [Scheme of the computational experiment for the construction of an element of the research stand of the fuel metering unit] Skhema provedeniya vychislitel’nogo eksperimenta dlya postroyeniya elementa issledovatel’skogo stenda agregata dozirovaniya topliva. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2014. V. 10, No 1. Pp. 87–89.
DOI: 10.21662/uim2014.1.016 - Adler Yu.P., Markova Ye.V., Granovskiy Yu.V. [Design of experiment in the search for optimal conditions] Planirovaniye eksperimenta pri poiske optimalnykh usloviy. M.: Nauka, 1976. 280 p. (in Russian).
- Denisova E.V., Nasibullayev I.Sh., Nasibullaeva E.Sh., Chernikova M.A. [Fluid flow in a channel at low pressure drops: a comparison of the Bernoulli and Navier-Stokes equations] Techeniye zhidkosti v kanale pri malykh perepadakh davleniya: sravneniye uravneniy Bernulli i Nav’ye-Stoksa. Bulletin of the Ufa Scientific Center of the Russian Academy of Sciences [Izvestiya Ufimskogo Nauchnogo Centra RAN]. 2014. No 4. Pp. 17–23.
eLIBRARY ID: 24326738 - Landau L.D., Lifshitz E.M. Theoretical physics. V. 6. Fluid Mechanics. M.: Nauka, 1988. 736 p. (In Russian).
- Batchelor G.K. An introduction to fluid dynamics. Cambridge University Press. 2000. 615 p.
DOI: 10.1017/CBO9780511800955 - Denisova E.V., Nasibullaeva E.Sh., Nasibullayev I.Sh. [Study of dynamic processes in the elements of fuel automation] Issledovaniye dinamicheskikh protsessov v elementakh toplivnoy avtomatiki. Mekhatronika, avtomatizatsiya, upravleniye. 2014. № 5. Pp. 31–36 (In Russian).
- Denisova E.V., Murashkin M.Yu., Nasibullayev I.Sh., Nasibullaeva E.Sh. [Application of nanostructured materials in fuel automation] Primeneniye nanostrukturnykh materialov v toplivnoy avtomatike. Nano- and microsystem technology [Nano- i mikrosistemnaya tekhnika]. 2014. No 8. Pp. 47–52 (In Russian).
eLIBRARY ID: 21884314 - Khvatov B.N. [Influence of the state of the surface layer on the kinetics of cavitation destruction of hydroturbine steel] Vliyaniye sostoyaniya poverkhnostnogo sloya na kinetiku kavitatsionnogo razrusheniya gidroturbinnoy stali. Vestnik TSTU. 2002. V. 8, No 3. Pp. 507–512 (In Russian).
eLIBRARY ID: 18909409 - Invention Patent No. 2550287, Invention Priority Dec. 30, 2013 «Piston with anti-cavitation surface treatment for fuel dosing device», authors: Urmancheev S.F., Nasibullaeva E.Sh., Denisova E.V., Chernikova M.A., Murashkin M.Yu. , Nasibullayev I.Sh. (In Russian)
- Nasibullayev I.Sh., Nasibullaeva E.Sh. [Investigation of the cavitational stability of an aluminum piston surface based on a threedimensional model] Issledovaniye kavitatsionnoy ustoychivosti poverkhnosti alyuminiyevogo porshnya. Transactions of the Institute of Mechanics named after R.R. Mavlyutov, Ufa Scientific Center, Russian Academy of Sciences [Trudy Instituta mehaniki im. R.R. Mavlyutova], Ufimskiy Nauchnyi Centr RAN]. 2017. V. 12, No 2. Pp. 143–151 (In Russian).
DOI: 10.21662/uim2017.2.021 - Landau L.D., Lifshitz E.M. [Theoretical physics. V. 7. Theory of Elasticity] Teoreticheskaya fizika. T. 7. Teoriya uprugosti. M.: Nauka. 2003. P. 259. (in Russian).
- Aganin A.A., Ilgamov M.A., Khismatullina N.A. [Deformation of the body surface when hit by a water jet] Deformatsiya poverkhnosti tela pri udare vodyanoy strui. Bulletin of the Ufa Scientific Center of the Russian Academy of Sciences [Izvestiya Ufimskogo Nauchnogo Centra RAN]. 2015. No 3. Pp. 12–18 (In Russian).
eLIBRARY ID: 24216955 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Darintsev O.V. [Study of fluid flow through a channel deformed by piezoelement] Izucheniye techeniya zhidkosti cherez deformiruyemyy p’yezoelementom kanal. Mnogofaznyye sistemy [Multiphase Systems]. 2018. V. 13, No. 3. Pp. 1–10 (In Russian).
DOI: 10.21662/mfs2018.3.001 - Sandberg G., Wernberg P.-A., Davidsson P. Fundamentals of Fluid-Structure Interaction. In Computational Aspects of Structural Acoustics and Vibration. CISM International Centre for Mechanical Sciences. V. 505. Vienna: Springer, 2009.
DOI: 10.1007/978-3-211-89651-8_2 - Nasibullayev I.Sh. [Reducing the systematic error of the average fluid flow rate in axisymmetric computer model of piezoelectric micropump] Snizheniye sistematicheskoy pogreshnosti srednego raskhoda zhidkosti v osesimmetrichnoy komp’yuternoy modeli p’yezoelektricheskogo mikronasosa. Mnogofaznyye sistemy [Multiphase Systems]. 2021. V. 16, No 1. Pp. 20–31. (In Russian).
DOI: 10.21662/mfs2021.1.004 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Darintsev O.V. Dependence of the Piezoelectric Micropump Operating Mode on Its Geometry. Journal of Physics: Conference Series. V. 2096, no. 1 P. 012081.
DOI: 10.1088/1742-6596/2096/1/012081 - Nasibullayev I.Sh. [Application of free software for processing and visualization of scientific research results] Ispol’zovaniye svobodnykh programm dlya obrabotki i vizualizatsii rezul’tatov nauchnykh issledovaniy. Multiphase Systems [Mnogofaznyye sistemy]. 2021. V. 16, No 2. Pp. 58–71 (In Russian).
DOI: 10.21662/mfs2021.2.009 - Nasibullayev I.Sh. [Analytical analysis of operating mode switching in a 2D model of a fluid cooling system of the micro-gripper] Analiticheskiy analiz pereklyucheniya rabochego rezhima v dvumernoy modeli sistemy zhidkostnogo okhlazhdeniya mikrozakhvata. Vestnik USATU [Vestnik UGATU]. 2021. Vol. 25, N. 3 (93). Pp. 120–131 (in Russian).
DOI: 10.54708/19926502_2021_25393120 - Nasibullayev I.Sh., Nasibullaeva E.Sh., Darintsev O.V. [Axisymmetric model of a microdevice with smoothing of fluid flow pulsations] Osesimmetrichnaya model’ mikroustroystva so sglazhivaniyem pul’satsiy potoka zhidkosti. In: XIV All-Russian Multi-Conference on Control Problems MKPU-2021. Materials of the XIV multiconference: in 4 vol. Rostov-on-Don. [V sbornike: XIV vserossiyskaya mul’tikonferentsiya po problemam upravleniya MKPU-2021]. 2021. Pp. 49–51 (In Russian).
eLIBRARY ID: 47458521 - Nasibullayev I.Sh. [Application of free software FreeFem++/Gmsh and FreeCAD/CalculiX for simulation of static elasticity problems] Primeneniye svobodnykh programm FreeFem++/Gmsh i FreeCAD/CalculiX dlya modelirovaniya staticheskikh strukturnykh zadach. Multiphase Systems [Mnogofaznyye sistemy]. 2020. V. 15, No. 3–4. Pp. 183–200 (In Russian).
DOI: 10.21662/mfs2020.3.129 - Geuzaine C., Remacle J.-F. Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities // International Journal for Numerical Methods in Engineering. 2009. Vol. 79, No. 11. P. 1309–1331.
DOI: 10.1002/nme.2579 - FreeCAD homepage.
https://www.freecadweb.org/ (дата обращения: 22.01.2022 г.) - Dhondt G. The Finite Element Method for Three-Dimensional Thermomechanical Applications. Wiley. 2004.
DOI: 10.1002/0470021217 - Campbell S.L., Chancelier J.-Ph., Nikoukhah R. Modeling and Simulation in Scilab/Scicos with ScicosLab 4.4. 2010. Springer, New York, NY. 330 p.
DOI: 10.1007/978-1-4419-5527-2 - Насибуллаев И.Ш. [Application of free software to visualize the results of simulation of dynamic processes] Ispol’zovaniye svobodnogo PO dlya vizualizatsii rezul’tatov modelirovaniya dinamicheskikh protsessov. Multiphase Systems [Mnogofaznyye sistemy]. 2021. V. 16, No 3–4. Pp. 121–143 (In Russian).
DOI: 10.21662/mfs2021.3.016 - Bazykin A.D. [Mathematical biophysics of interacting populations] Matematicheskaya biofizika vzaimodeystvuyushchikh populyatsiy. Moskva: Nauka. 1985. 181 p. (In Russian).
- Getling A.V. [Rayleigh-Benard convection. Structures and dynamics] Konvektsiya Releya-Benara. Struktury i dinamika. M: Editorial URSS. 247 p. (In Russian).
- Belousov B.P. [Periodically acting reaction and its mechanism] Periodicheski deystvuyushchaya reaktsiya i yeye mekhanizm. Collection of abstracts on radiation medicine for 1958 [Sbornik referatov po radiatsionnoy meditsine za 1958 g.]. M: Medgiz. 1959 (In Russian).
- Darintsev O.V., Nasibullayev I.S., Bogdanov D.R. Inspection of pipelines of complex topology using an adaptive, scalable multi-segment mobile robot. Communications in Computer and Information Science. 2021. Vol. 1426. Pp. 137-150.
DOI: 10.1007/978-3-030-88458-1_11 - Nasibullayev I., Darintsev O., Bogdanov D. In-Pipe Modular Robot: Configuration, Displacement Principles, Standard Patterns and Modeling. Smart Innovation, Systems and Technologies. Vol. 232, pp. 85–96. Springer, Singapore. 2022.
DOI: 10.1007/978-981-16-2814-6_8 - Migranov A.B., Bogdanov D.R., Darintsev O.V., Nasibullaev I.Sh., Kopev A.S. Modular mobile robot for inspection of pipelines of complex topology. In: XIV All-Russian Multi-Conference on Control Problems MKPU-2021. Materials of the XIV multiconference: in 4 vol. Rostov-on-Don. [V sbornike: XIV vserossiyskaya mul’tikonferentsiya po problemam upravleniya MKPU-2021]. 2021. Pp. 196–198 (In Russian).
eLIRARY ID: 47458488 - Gnuplot homepage.
http://www.gnuplot.info/ (accessed: 07.12.2021) - Filippov S.V. [Blender software platform as an environment for modeling objects and processes in natural sciences] Programmnaya platforma Blender kak sreda modelirovaniya ob’yektov i protsessov yestestvenno-nauchnykh distsiplin. Preprints of IAM im. M.V. Keldysh [Preprinty IPM im. M.V.Keldysha]. 2018. No. 230. 42 p. (In Russian).
DOI: 10.20948/prepr-2018-230
